GP-Ultimate 120×120 Thermal Pad Series
Thickness variants:
0.5 mm (TP-GP04-S-A), 1.0mm (TP-GP04-S-B), 1.5mm (TP-GP04-S-C), 2mm (TP-GP04-S-D), 3mm (TP-GP04-S-E)
The GP-Ultimate 120×120 is designed to provide perfect thermal interface to transfer heat to heatsinks when installed on PCB with height differences and uneven surfaces such as DRAM ICs, VRM ICs, power MOSFETs, NVRAM ICs and other high-temperature SMD components. Thanks to its enhanced multilayer matrix, superior material composition, and the ultimate 15W/mK thermal conductivity, the GP-Ultimate 120×120 offers the best performance in class.
The GP-Ultimate 120×120 is non-electrical conductive, non-corrosive, non-curing, non-toxic and supports extended operating temperature range -60°C to 220°C. It features seamless application and has the thermal pad dimensions of 120x120mm to best fit enlarged surfaces of RAM Memory modules, GPU and CPU VRM circuits, M.2 Type SSD and other densely packed electronic devices.
Please remove the protective film before application!
MSRP:
Single Pack (1pc included):
0.5mm: USD 18.00 / 15.50 Euro
1mm: USD 24.00 / 21.00 Euro
1.5mm: USD 30.00 / 26.00 Euro
2mm: USD 36.00 / 31.00 Euro
3mm: USD 46.00 / 40.00 Euro
EAN (Single Pack 1pc):
0.5mm: 4897025783058
1mm: 4897025783065
1.5mm: 4897025783072
2mm: 4897025783089
3mm: 4897025783096
Density (g/cm3): | 3.2 |
Hardness (Shore): | 60-70 OO |
Size (mm): | 120 x 120 |
Thermal Pad, or Thermally Conductive Pad, is a pre-formed sheet of solid material made of a wax, silicone or synthetic matrix that is filled with a composition of thermally conductive microparticles and engineered to conduct heat efficiently from a high-temperature surface to heatsink installed onto it. Once placed pad in between, it softens, fills the surface gaps and boosts heat transfer.
General applications: Motherboard VRM, Motherboard Chipset, SSD, DRAM ICs, GPU VRAM, GPU VRM, micro-controller units, MOSFETs and analog ICs.
It may vary significantly depending on the device that is supposed to be used with. Please refer to the device manual / instructions or reach out to us for more information.
Unfortunately not, you cannot reuse thermal pads.
No, thermal pads are not adhesive. You will need a proper mounting to hold the thermal pad with a heatsink.
When using thermal pads, it’s not recommended that you stack one above the other. Doing so will create gaps between the pads and degrade heat transfer.
Yes, you can compress GP-Extreme / GP-Ultimate by up to 30% of thickness with an adequate pressure of the heatsink mounts.
GP-Extreme / GP-Ultimate carries a 5 year limited warranty.
Absolutely not! Thermal pads are non-electrically conductive.
Yes, you can. Although it’s advisable that you use GC-Extreme Thermal Paste for best performance in CPU applications.
We don’t use the W/mK rating since it may vary depending on your application and doesn’t reflect real-world performance. Please consider the thinnest possible GP-Extreme / GP-Ultimate variant in your application for efficient heat transfer and best performance.