• 9 Full Color RGB LEDs
  • Programmable Digital-RGB Control
  • Extreme Static Pressure
  • High Precision Shark-Tooth Blade
  • Noiseless Motor Drive IC
  • Ultra-Durable Double Ball Bearing

Out of stock

Radiant-D (FN-RADIANTD-20)
120mm Extreme Performance Programmable ARGB Fan


RGB Technologies Supported


Magnificent Colors. Extreme Performance. Bold Design


Brewed with top technologies and passion, the Radiant-D RGB Fan is a special craft for modders and gaming enthusiasts. It adds programmable Digital-RGB control with individually addressable RGB (ARGB) LEDs that enables variable color settings for each of the 9 LEDs installed to the fan and fosters a stunningly vivid RGB lighting experience. Along with the extreme performance profile and bold design, all that makes the Radiant-D a perfect ingredient for gaming rigs and custom PCs. Just try it, ignite full colors of life inside your PC!






9 Full Color RGB LEDs: circularly mounted high-bright LEDs for a stunningly vivid RGB Lighting experience.


Programmable Digital-RGB Control: limitless color modes and lighting effects via individually addressable RGB LEDs.


Extreme Static Pressure: powerful impeller with the unprecedented static pressure and performance profile.


High Precision Shark-Tooth Blade: 3D optimized blade for even higher airflow and lesser noise.


Noiseless Motor Drive IC: newly designed and enhanced motor driver to eliminate clicking noise.


Ultra-Durable Double Ball Bearing: carefully selected top-quality ball bearings for ultra-durable operation.


Wide Range RPM: extended fan speed in the range 500 – 2000 RPM.


Broad Compatibility: all modern motherboards with RGB Sync controls and 5V Addressable headers are supported.


Standard RGB and Individually Addressable RGB Explained


In standard RGB applications, this type of fans uses the standard RGB LED header with 4-wiring: 12V, R, G, B. All the LEDs integrated with the fan are then connected onto the same 4 busses, they are all controlled as a whole, so they each will output exactly the same color.


It’s like you set color for an object in your graphics editor, for example, Red: 25, Green: 50 and Blue: 125, an external RGB controller or motherboard drives the standard RGB LED fan in the same way by altering power on the color busses at a proper duty cycle – the Red, Green and Blue bus, respectively – to output the desired RGB color.


Of course, colors can be managed dynamically, with numerous lighting effects in series. But uniformity of the LEDs – one color for all the LEDs at a time – limits RGB lighting effects to some degree.


RGB Fan Headers


Radiant-D Individually Addressable RGB (ARGB)


Unlike the standard RGB fans, controls of the individually addressable RGB (ARGB) fans are digital in nature. For this case, the fans use the addressable RGB LED header with 3-wiring: 5V, D, Ground. And the LEDs integrated with the fan have a special companion IC which drives each of them individually: it resides on a one-wire serial bus and sends commands like “LEDs number 3, 5 and 6: switch to green” to set the desired color per individual LED. So, each of the LEDs has its own ID and is controlled independently from the others. In turn, an external app can be used to program the IC giving virtually unlimited options of color modes and effects. Rainbow-circle, rotating colors, multipoint pulsating colors and some other stunningly vivid RGB lighting effects are available only with the ARGB fans. But, as far as this type of fans supports digital RGB controls only, it’s up to your motherboard to provide a full-featured RGB app to discover the excellence of RGB lighting.


Please refer to your motherboard manual before connecting the individually addressable RGB fans.


The fan is RoHS and WEEE conform and carries a 5 year warranty.


EAN: 4897025781955


Caution: the RGB cable can support connection to Addressable RBG (5V) header only. Please refer to your mainboard installation manual for details. Plugging into the standard RGB Header (12V) may damage your fan!


Air Flow (CFM): 77.2 max.
Bearing: Double Ball Bearing
Cable Length (mm): 500 (PWM & RGB)
Power Draw (W): 5.4 max
DC Voltage (V): 12
Dimensions (mm): 120 (l) x 120 (w) x 25 (h)
Fan Life Time MTTF at 40C (h): 100000
Fan Speed (RPM): 500 – 2000
Noise Level (dBA): 40.4 max
Static Pressure (mmAq): 3.39
Fan Connector: 4-Pin PWM Header
LED Connector: 3-Pin Addressable RGB Header (5V)
Warranty (years): 5
Weight (g): 188
Included: 4 Screws

Hardware.Info Award

February 2020: Hardware.Info

"Mag het iets meer kosten, dan hebben we voor diverse gebruiksdoelen diverse aanraders. Voor montage op een koelblok of radiator heb je het liefst een fan met een hoge statische druk en dan zijn de Gelid Radiant-fans (verkrijgbaar met zowel reguliere als addressable rgb, 14 resp. 15 euro) en XSPC RGB Series 120mm Addressable (20 euro) de beste keuzes, waarvoor ze een Excellent Choice award krijgen."


October 2019: Overclockers.ru

"Разработчики проделали огромную работу над визуальной частью модели Gelid Radiant-D. Семилопастная структура с полупрозрачными лопастями и характерными акульими засечками подчеркивается огромным ротором, который скрывает за матовым корпусом не только двойной шарикоподшипник скольжения, но и девять светодиодов с независимым управлением."

Masterbitz Review

August 2019: Masterbitz Review

"Como sabemos en el mercado hay un sin numero de fan de diferentes rendimiento y capacidades, pero siempre es bastante bueno tener fan que ofrece el mejor rendimiento posible sin que veamos mermar su potencia a la hora del trabajo, la propuesta de Gelid con el Radiant-D a sido de las mejores que podemos ver y no solo por su rendimiento si no que ofrece RGB para los fanáticos y que es un fan que podría usarse tanto en gabinetes como en Cooler y me atrevo a decir que en watercooling, claro que el fabricante no lo menciona pero considerando la potencia lo vemos de esta forma, el empaque a sido bastante bueno con el único detalle que no incluyeron accesorios talvez algún controlador RGB para el fan para los usuarios que no poseen placas RGB como es mi caso, pero por parte de lo demás esta bueno."


June 2019: WhatNext.pl

"Oba modele są w pełni godne polecenia. Są to bardzo wydajne konstrukcje zapewniające wysokie przepływ powietrza na każdych obrotach. Są one przy tym całkiem ciche – jedynie na maksymalnych RPM mogą przeszkadzać. Pierwsza wersja posiada tradycyjne RGB a druga ARGB – oba podświetlenia powinny robić wrażenie. Szkoda, że nasz kontroler nie działał z tym drugim, żeby pokazać Wam uzyskany efekt. Oba śmigła są całkiem nieźle wykonane i dobrze sprawdzą się w obudowach czy na różnych radiatorach. Warto więc rozważyć ich zakup w szczególności, że cena nie jest wyjątkowo wysoka."

Unboxing Treatment Award

April 2019: Unboxing Treatment

"The GELID Radiant and Radiant-D fans did exceptionally well in terms of cooling performance. It performed on par with the more premium Noctua NF-F12 in heatsink, and could generate a noticeable amount of airflow at most RPM ranges. The integrated RGB lighting looks awesome with vivid colors."

TechGaming Award

January 2019: TechGaming

"Al met al zijn de Radiant en Radiant-D een tweetal uitstekende fans te noemen. Op een lagere RPM-instelling is de geluidsproductie acceptabel en blijft er voldoende luchtstroom aanwezig voor koeling. In het geval van hete zomerdagen of wanneer geluidsproductie geen factor is, zoals bij muziek of het gebruik van een headset, dan is het de beste koeling voor de prijs. Zelfs als je dus geen gebruik maakt van de volledige 2000 RPM, is het nog altijd fijn om te weten dat die optie aanwezig is."

MegaObzor.Com, August 2019


Masterbitz Review, August 2019


ArtomU, July 2019


Pashtet495, July 2019