GELID Solutions Ltd

Unit 704 B, Sunbeam Centre

27 Shing Yip Street, Kwun Tong, Hong Kong


GP-Extreme 80x40
GP-EXTREME 80x40GP EXTREME 80x40 0.5mm



  •         ● Ultimate Heat Conductivity
  •         ● Non-Electrical Conductive
  •         ● Non-Corrosive, Non-Curing & Non-Toxic


Buy on Amazon
Buy at
Shop Now!



GP-Extreme Thermal Pad Series


The cutting-edge Thermal Pad


Thickness variants:
Single Pack (TP-GP01-A) 0.5mm, (TP-GP01-B) 1.0 mm, (TP-GP01-C) 1.5mm,   (TP-GP01-D) 2mm, (TP-GP01-F) 2.5mm, (TP-GP01-E) 3mm
Value Pack (TP-VP01-A) 0.5mm, (TP-VP01-B) 1.0 mm, (TP-VP01-C) 1.5mm,
(TP-VP01-D) 2mm, (TP-VP01-F) 2.5mm (TP-VP01-E) 3mm
The GP-Extreme is designed to provide perfect thermal contact to the heatsink when installed on PCBs with height differences and uneven surfaces such as micro-controller units, memory ICs, analog ICs, MOSFETs and other SMD components. Thanks to its softness and ultimate thermal conductivity the GP-Extreme fills spaces properly and offers the best performance in class. The GP-Extreme is non-electrical conductive, non-corrosive, non-curing and non-toxic. The GP-Extreme ensures an easy application and the thermal pad dimensions of 80×40 mm optimally fit to large PCB surfaces of VGA cards, laptops, gaming consoles and other densely packed devices.


GP-Extreme 120x120


Please remove the protective films before application!




Single Pack (1pc included):
0.5mm: USD 9.00 / 7.00 Euro
1mm: USD 10.00 / 8.00 Euro
1.5mm: USD 11.00 / 9.00 Euro
2mm: USD 13.00 / 10.00 Euro
2.5mm: USD 18.00 / 11.00 Euro
3mm: USD 19.00 / 12.00 Euro


EAN (0.5mm): 4897025781191
EAN (1mm): 4897025781207
EAN (1.5mm): 4897025781443
EAN (2mm): 4897025781528
EAN (2.5mm): 4897025783423
EAN (3mm): 4897025781634


Value Pack (2pc included):
0.5mm: USD 13.00 / 9.00 Euro
1mm: USD 15.00 / 10.00 Euro
1.5mm: USD 17.00 / 11.00 Euro
2mm: USD 19.00 / 12.00 Euro
2.5mm: USD 20.00 / 13.00 Euro
3mm: USD 21.00 / 14.00 Euro


EAN (0.5mm): 4897025783362
EAN (1mm): 4897025783379
EAN (1.5mm): 4897025783386
EAN (2mm): 4897025783393
EAN (2.5mm): 4897025783416
EAN (3mm): 4897025783409



Density (g/cm3): 2.8
Hardness (Shore): 35 OO
Size (mm): 80 x 40
Thermal Pad FAQ

Thermal Pad FAQ

  • What are Thermal Pads?

Thermal Pad, or Thermally Conductive Pad, is a pre-formed sheet of solid material made of a wax, silicone or synthetic matrix that is filled with a composition of thermally conductive microparticles and engineered to conduct heat efficiently from a high-temperature surface to heatsink installed onto it. Once placed pad in between, it softens, fills the surface gaps and boosts heat transfer.


  • Where are Thermal Pads used?

General applications: Motherboard VRM, Motherboard Chipset, SSD, DRAM ICs, GPU VRAM, GPU VRM, micro-controller units, MOSFETs and analog ICs.


  • Which thickness variant of GP-Extreme / GP-Ultimate will fit my application?

It may vary significantly depending on the device that is supposed to be used with. Please refer to the device manual / instructions or reach out to us for more information.


  • Can Thermal Pads be reused?

Unfortunately not, you cannot reuse thermal pads.


  • Are Thermal Pads adhesive?

No, thermal pads are not adhesive. You will need a proper mounting to hold the thermal pad with a heatsink.


  • Can I stack Thermal Pads?

When using thermal pads, it’s not recommended that you stack one above the other. Doing so will create gaps between the pads and degrade heat transfer.

  • Are GP-Extreme / GP-Ultimate compressible?

Yes, you can compress GP-Extreme / GP-Ultimate by up to 30% of thickness with an adequate pressure of the heatsink mounts.


  • How long does GP-Extreme / GP-Ultimate last?

GP-Extreme / GP-Ultimate carries a 5 year limited warranty.


  • Are Thermal Pads electrically conductive?

Absolutely not! Thermal pads are non-electrically conductive.


  • Can I use GP-Extreme / GP-Ultimate with a CPU heatsink?

Yes, you can. Although it’s advisable that you use GC-Extreme Thermal Paste for best performance in CPU applications.

  • Where can I find the W/mK specifications of GP-Extreme / GP-Ultimate?

We don’t use the W/mK rating since it may vary depending on your application and doesn’t reflect real-world performance. Please consider the thinnest possible GP-Extreme / GP-Ultimate variant in your application for efficient heat transfer and best performance.

You may also like…

Cookie Box Settings
Close Bitnami banner