AMBER5 (RF-RGB-01)
5-Channel RF Remote ARGB Controller
Make your RGB setup simple and cool!
AMBER5 controls up to 5 fans, strips or other Addressable RGB (ARGB) devices and boasts 366 vivid lighting presets spanning a carefully selected collection of pre-programmed RGB modes and dynamic effects.
The SATA power connectivity is utilized which delivers up to 85W maximum power output and supports ARGB devices with up to 120 LEDs onboard to lit up and control on each channel.
AMBER5 also supports a passthrough ARGB Sync/Hub Mode via the 3-pin ARGB Sync Input while connected to compatible motherboards: ASUS, Gigabyte, MSI or ASRock. You are free to use the controller presets or switch to your own presets designed in your favorite RGB software.
AMBER5 comes with the 21-key RF (Radio Frequency) Remote to provide reliable and responsive remote control in the range of 8 meters.
AMBER5 can be installed inside or outside your PC just in seconds thanks to the built-in magnet. Additionally, the adhesive Sticky Pad is also included to facilitate installation in aluminum-made or non-metallic PC chassis.
MSRP: USD 14.99 / EUR 12.99
EAN: 4897025782587
*AMBER5 is not for sale in South Korea (FR 433MHz bandwidth used for remote control operation)
Yes, absolutely. AMBER5 is also compatible with other popular ARGB Sync software provided by MSI, Gigabyte and Asrock.
You can simply press the middle top button on the RF Remote, and you’re ready to go.
No, AMBER5 is designed to work with 3-Pin 5V Adrressable RGB hardware only. Connecting AMBER5 to 4-Pin 12V RGB Header will irreversibly damage your controller and the ARGB fans connected to it.
Yes, sure. Please note however: AMBER5 will sync your ARGB fans with the same RGB mode, it appears as a single unit on RGB Sync software and can’t control each fan individually.
Oh no, don’t do this! It will burn AMBER5!
No, it will irreversibly damage AMBER5! Only 3-Pin 5V Addressable RGB Fans can be connected and used with AMBER5.
Please use the ARGB Sync Cable to connect AMBER5 to the motherboard’s 3-Pin 5V ARGB Header, and the Power SATA Cable to connect it to a SATA output of your PSU.
One RGB Mode applies to all fans.
Please check your motherboard specifications on the manufacturer’s website or supplied installation guide if the ARGB Sync functions are supported. Please also seek the 3-Pin 5V ARGB headers on your motherboard, if you can find any.
Please download Quick Start Guide here.
Controller Unit:
ARGB Outputs: | 5 x 3-pin ARGB Header |
ARGB Voltage (V): | 5 |
Dimensions (mm): | 90.7 x 49.7 x 12.5 |
Inputs: | 1 x Power SATA, 1 x PWM Control, 1 x 3-pin ARGB Sync |
Power Draw (W): | 85 max |
Power Supply: | SATA Connector |
PWM Fan Outputs: | 5 x 4-pin PWM Fan Header |
PWM Fan Voltage (V): | 12 |
Per-Channel ARGB Current (A): | 1 max |
Per-Channel PWM Fan Current (A): | 1 max |
Weight (g): | 34.2 |
Warranty (years): | 2 |
RF Remote:
Dimensions (mm): | 86 x 40 x 7 |
Number of Keys: | 21 |
Number of RGB Modes: | 366 |
RC Method: | Radio Frequency (RF 433MHz) |
RC Range (m): | 8 |
RGB Effects Speed Levels: | 8 |
Static Brightness Levels: | 8 |
Weight (g): | 15 |
Included: 1 x Power SATA Cable, 1 x PWM Control Cable, 1 x ARGB Sync Cable, 1 x Sticky Pad *1 x CR2025 Battery required, needs to be purchased separately